1, a non-polar compounds, and water or polar substances genes play a role not so strong defoaming action, the amount is very low.
2, chemically stable, long exposed gelled air does not occur, and product effect does not occur.
3, the high temperature, acid, alkaline medium can give full play the role of anti-foaming.
4, does not contain APEO, meet environmental requirements in Europe and America.
Appearance: white emulsion
Active content: 20%
Emulsifier Type: Non-ionic
Gravity, g / cm3: 1.01
PH: 6-8
Water solubility: cold water dilution
When used, the emulsion is added directly to the foaming system, you can get a good defoaming effect, the amount of foaming liquid weight is generally 50 ~ 50Oppm, its optimum dosage is mainly determined by experiment. In order to improve the accuracy of anti-foaming emulsion effect and measured, you can simply use cold water or diluted after blistering direct. Contraindicated hot or cold liquid dilution, otherwise it will cause the emulsion breaking. After diluting the emulsion stability will deteriorate during storage may delamination (floating oil) phenomenon, that is breaking. Therefore, the emulsion should run out as soon as possible after dilution.
200KG 18KG plastic drum and room temperature storage, the storage period of 12 months.
